Mitel 5330e - Using the Settings Application; Using the Call History Application

5330e/5340e IP Phones – User Guide
Using the Settings Application
The Settings application provides a single location to access all your phone settings. Select
any of the options below to access a window where you can view and configure settings for
your phone. The Settings window provides the following:
 User Information: Use to specify your name and phone number.
 Languages: Allows you to select the language in which phone prompts and applications
appear. Supported languages are English, French, Spanish, German, Dutch, Italian, and
Portuguese. Note: The system can support up to three languages at one time. Language
choices appearing in the phone display are controlled by ICP programming.
 Text Size: Allows you to specify the font size (large or small) for the 5340e IP Phone.
 Programmable Keys: Use to assign features to the Programmable Keys that are
available in the Phone application.
 Call Notification: Use to specify that the Phone application behavior when incoming or
outgoing calls occur.
 Brightness and Contrast: Allows you to adjust the display brightness and contrast of
your phone.
 Screen Saver: Allows you to specify a specific time of inactivity on your phone that
triggers the screen saver to display.
 Audio Feedback: This setting allows you to adjust the volume of the audio feedback as
well as the error beeps and enable or disable the setting.
 Message Key Configuration: Allows you to configure the Message
key.
 External Message: Allows you to program your phone to launch the Phone application
when it displays special messages in the Information Display area.
 Go To URL: Allows you to enable third party URLs to display in the Web Browser
application.
 PC Connectivity: Allows you to enter a password that is used by the phone to establish
communications with the PC-resident Unified Communicator (UC) Express application.
See the Unified Communicator Express User Guide at http://edocs.mitel.com
for details.
 About 5330e/5340e IP Phone: This screen displays the software release.
Using the Call History Application
Use this application to display logs of your most recent 50 calls. After the 50-call limit has
been reached, the oldest log is replaced each time a new call is missed, made, or answered.
From this application, you can
 display logs by type
 display call information (if available) for the logs
 return missed calls by pressing a key (5340e IP only)
 delete or modify digits before saving or dialing a call
 delete logs
If you are a hot-desk user, you can view and maintain your call history logs when you are
logged into another extension.
- 9 -