Mitel 5330e - Auto Dial

5330e/5340e IP Phones – User Guide
Auto Dial
When a Cordless Module is installed and at least one Mitel-branded device is paired, the
Auto Dial feature is available in the Settings menu. You can program a number that is
automatically dialed when a cordless device hookswitch button is pressed.
To program an Auto Dial number:
1. Press the blue Applications
key, and then press Settings.
2. Press Auto Dial, and then press Edit Number.
3. In the on-screen keyboard, enter the autodial number.
4. Press Save.
5. Press Edit Label.
6. In the on-screen keyboard, enter the appropriate information.
7. Press Save and then press Close.
To disable Auto Dial:
1. Press the blue Applications
key, and then press Settings.
2. Press Auto Dial.
3. Press Disable Auto Dial. The Auto Dial settings you have programmed are maintained
when the feature is disabled.
4. Press Save.
 To re-enable, repeat steps 1 and 2 and then press Enable Auto Dial.
 To change Auto Dial information, press Edit Number and/or Edit Label.
 Press Save to save all changes.
- 86 -