Mitel 5330e - Specify Call Notification Behavior; Adjust the Ringer

5330e/5340e IP Phones – User Guide
Specify Call Notification Behavior
To specify that the Phone window automatically displays when you are making or
receiving calls:
1. Press the blue Applications key
.
2. Press Settings.
3. Press Call Notification.
4. Press the appropriate options to identify when you want the Phone window to display. For
example, if you select the Made option, each time the phone goes off hook to make a
call, the Phone window is displayed.
5. Press Save.
Notes:
 When To my prime line is selected, select Display Call Info to display Call Information
instead of the Phone window.
 Press Cancel at any time to exit this application without making any changes.
 When the Conference Unit application is displayed, the Phone application is not
automatically displayed when making or receiving calls.
Adjust the Ringer
To adjust the Ringer Volume while the phone is idle:
1. Press Superkey (must be programmed to a key).
2. Press the No softkey until "Ringer Adjust?" appears.
3. Press “Ring Adjust”.
4. Press No.
5. Press “Ringer Vol”.
6. Press
(UP) or (DOWN) .
7. Press Superkey.
Note: Adjusting ringer volume also adjusts cordless headset/handset ringer tone.
- 16 -