Mitel 6390 - Using the Speakerphone; Using a Headset

Making and receiving calls
7
Using the speakerphone
The speakerphone feature allows you to speak to someone without using the handset or a headset.
Making a call using the speakerphone
Making a regular call
1. Press the key (press the key twice if a headset is attached to the phone).
2. At the dial tone, enter the number you wish to call using the dialpad.
Pre-dialing a number
1. Enter the number you wish to call using the dialpad.
2. Press the key (press the key twice if a headset is attached to the phone) or press
the Dial softkey (and press the key if a headset is attached to the phone).
Answering an incoming call using the speakerphone
To answer an incoming call using the speakerphone, press the key when the phone rings
(press the key twice if a headset is attached to the phone).
Switching to the speakerphone while on a call
When on an active call using the handset, press the key to switch to the speakerphone (press
the key twice if a headset is attached to the phone) and hang up the handset.
When on an active call using a headset, press the key to switch to the speakerphone.
Using a headset
The 6390 accepts analog headsets through the RJ9 headset port on the back of the phone indicated
by the f (headset) icon.
Contact your phone equipment retailer or distributor to purchase a compatible headset. For headset
installation instructions, please refer to the 6390 Installation Guide provided with your phone.
Note: Pre-dialing is only available if the Live Dialpad feature is disabled. Live dialpad can be
disabled through the Live dialpad option in the Options List.
Note: If you subscribe to a Caller ID service, caller information will be sent from the telephone
service provider to your 6390 between the first and second ring. Therefore, if you want the number
of the incoming call to appear on the display and in the Callers List, you must wait until the Caller
ID information appears on the display before answering the phone.
Notes:
1. The RJ9 headset port is for headset use only. Plugging any other devices into this port may
cause damage to the phone and will void your warranty.
2. Customers should read and observe all safety recommendations contained in the respective
headset operating guides when using any headset.