30 MiVoice 5380 / MiVoice 5380 IP
eud-1679/1.0 – R3.0 – 08.2015
Using the display and operating elements
Other navigation possibilities
Resetting activated features
You can deactivate again all the activated functions (e.g. Forwarding, Barring).
Signals
Indicator LED signals
Depending on the situation the indicator LEDs either flash or remain steadily lit.
Scrolling back through the menu:
Press the Correction key.
Menu
Press the navigation key up.
➔All the activated functions are now displayed.
Or:
Retrievable also via menu: Menu > Activated features.
Reset
Reset the function in question.
➔The function is now deactivated.
LED State Description
Flashes fast Incoming call
Flashes slowly Appointment call
Lit
• New voice message or new text message
• Callback
Note:
For an explanation of the indicator LED on expansion module MiVoice M535,
see chapter
"Using the MiVoice M535 expansion key module", page 25.
c
To Next Page