Mitel MiVoice 5380 - Changing the Pin

84 MiVoice 5380 / MiVoice 5380 IP
eud-1679/1.0 – R3.0 – 08.2015
Personalizing your phone
Configuring the DTMF mode
You want to decide whether the DTMF mode is to be activated or deactivated as default
on your phone.
Changing the PIN
You want to change the PIN used to lock/unlock your phone (see chapter "Locking your
phone", page 52 and "Unlocking your phone", page 53).
The digit combination "0000" is set as default. You can select any 2 to 8-digit combination
for your new PIN.
If you have forgotten your PIN, your system administrator can reset it to the default set-
ting. Depending on the system settings the function may not be available.
Menu
Press the Menu Foxkey.
Settings
Scroll to Settings and press the Select Foxkey.
General
Scroll to General and press the Select Foxkey.
DTMF
Scroll to DTMF and press the Modify Foxkey.
<DTMF setting>
Activate or deactivate DTMF and confirm with the Ok Foxkey.
➔The setting is stored.
Note:
Your PIN applies to all your phones.
Menu
Press the Menu Foxkey.
Settings
Scroll to Settings and press the Select Foxkey.
General
Scroll to General and press the Select Foxkey.