Personalizing your phone
MiVoice 5380 / MiVoice 5380 IP 87
eud-1679/1.0 – R3.0 – 08.2015
Local IP settings (MiVoice 5380 IP)
The IP-relevant data for your phone is stored in this menu. The input of this data is pass-
word-protected; it can therefore only be carried out by your system administrator. You can
however call up the data.
Protect yourself against calls
This sections explains how you can protect yourself against other users applying
telephony features on you via menu guidance or using function codes.
Activating protection against call types
You want to protect yourself against certain types of calls.
You can set the settings so that the following functions, where available in your communi-
cations system, are not allowed on your phone.
• Do not disturb: Incoming calls are automatically forwarded to a specific destination.
• Call waiting: You are already making/taking a call. You are notified by a waiting tone
and phone number or name in the display that someone else is trying to reach you.
You can either answer or reject this second call.
• Intrusion: A third participant can intrude into your active call and listen to your conver-
sation.
• Announcement: You can address internal users directly via their loudspeaker – where
available –, without waiting for a reply (similar principle to that of an intercom system).
• Call forwarding: Incoming calls are forwarded directly to your phone.
Ask your system administrator whether these functions are enabled on the system.
Menu
Press the Menu Foxkey.
Settings
Scroll to Settings and press the Select Foxkey.
General
Scroll to General and press the Select Foxkey.
Local settings
Scroll to Local settings and press the Select Foxkey.
➔IP-relevant settings retrievable.
To Next Page