Mitel MiVoice 5380 - Page 85

Personalizing your phone
MiVoice 5380 / MiVoice 5380 IP 85
eud-1679/1.0 – R3.0 – 08.2015
Enter the display text for the idle state
You want to change the text displayed by your phone in the idle state.
In addition to the date and time you can enter a personal text for the text displayed in the
idle state.
PIN
Scroll to PIN and press the Modify Foxkey.
➔The display shows Old PIN.
<Old PIN>
Enter the old PIN and confirm with the Ok Foxkey.
➔The display shows New PIN.
<New PIN>
Enter the new PIN and confirm with the Ok Foxkey.
➔The display shows Confirm.
<New PIN>
Enter the new PIN a second time and confirm with the Ok Foxkey.
➔The new PIN is stored.
Notes:
• For each digit entered, the display shows an "*".
• You can also change the PIN with function code *47 (see User Guide
Function Codes on the
Mitel DocFinder).
Menu
Press the Menu Foxkey.
Settings
Scroll to Settings and press the Select Foxkey.
General
Scroll to General and press the Select Foxkey.
Idle text
Scroll to Idle text and press the Modify Foxkey.
<Text>
Enter the text and confirm with the Ok Foxkey.
➔The text is stored.
Note:
You can use the Correction key to delete any incorrect character.
☛
☛
☛
☛