Mitel MiVoice 5380 - Page 65

Supplementary features
MiVoice 5380 / MiVoice 5380 IP 65
eud-1679/1.0 – R3.0 – 08.2015
Hotline
The hotline is typically used for lift phones, emergency phones, or for baby alarms or hot-
line in the hospitality/hotel branch.
A user needs help and picks up the handset or presses the loudspeaker key. The user is
automatically routed to the preconfigured hotline destination number stored in the com-
munication server. The person responsible answers the call and is connected with the
user seeking help.
Alarm cancellation delay: Your system administrator can set a delay (0-60 seconds,
depending on the Mitel system phone). During this delay the user can enter another call
number in order not to trigger a call on the hotline destination number. If the user does not
dial another phone number during this predefined time or puts the handset back down
again, a connection with the Hotline number is automatically set up. Contact your system
administrator for more information.
Log in
Log in free seating:
Press the Log in Foxkey.
Or:
Free seating can also be selected using the menu: Menu > Settings >
Log in.
<Call number, PIN>
Enter call number and PIN and confirm with the Ok Foxkey.
➔You are now logged in and can use the free seating phone with your
personal settings.
Note:
The default PIN setting "0000" is not accepted. First change the PIN as
described in chapter
"Changing the PIN", page 84 or use the function
code *47 (see User Guide Function Codes on the
Mitel DocFinder). If
you have forgotten your PIN, your system administrator can reset it to the
default setting.
Log out
Log out free seating:
Press the Log out Foxkey.
➔The display with the call number is displayed.
Depending on the system configuration enter the PIN and confirm with
the Ok Foxkey.
➔You are now logged off; the free seating phone is now available again
to other users.
Note:
You are automatically logged off if your system administrator has set up
an automatic logoff process.
☛