3-51
Emergency stop input and output etc.
3 Controller
Fig.3-11 ： Emergency stop cable connection (ferrite core installation CR1DA-771/CR1DA-771-S15)
EMGINコネクタ
300mm以内
フェライトコア（付属品）
２回通し
外部装置からの非常停止入力信号線
外部装置への非常停止出力信号線
<CR1DA-771/CR1DA-771-S15>
Pin allotment of EMGIN and the EMGOUT connector is shown in Fig. 3-12.
Within 300mm
EMGIN
The emergency-stop-input line from external equipment
The emergency-stop-output line to external equipment
Ferrite core
(attachments)
Pass twice
* The figure is CR1DA-771 controller.
(CR1DA-771-S15 is the same.)
To Next Page
Loading...
