Mitsubishi Electric Melsec A Series - Page 191

5 - 25
REPLACEMENT OF THE MELSECNET/10 (REMOTE I/O NETWORK)
5
(2) Parameter of multiplexed remote master station
*1
: Compatible, : Partial change required, × : Incompatible
*1 The multiplexed remote master station is the station type of the multiplex master system.
Only the following CPU modules support the multiplex master system.
• Process CPU
• Redundant CPU
Parameter
name
Description
Compat-
ibility
Precautions for replacementQnA/QnAS series
MELSECNET/10 module
Q series
MELSECNET/H module
Network
parameter
Network type Network type
Starting I/O No. Starting I/O No.
Network No. Network No.
Total number of (slave) stations Total number of (slave) stations
- Group No.
The group No. is not used in the
remote I/O network.
Set to [0].
- Mode
Set the mode in GX Works2 or GX
Developer network parameters.
Network range
assignment
(common
parameter)
Monitoring time
Network range
assignment
(common
parameter)
Monitoring time
BW setting BW setting
XY setting XY setting
Reserved
station
designation
Reserved
station
designation
Remote sub-
master station
specification
Remote sub-
master station
specification
I/O assignment
setting
-
Set with the PLC parameter of
each remote I/O station.
Supplemental
settings
Supplemental
settings
Refresh parameters Refresh parameters
Routing parameters Routing parameters