REPLACEMENT OF CC-LINK
6 - 19
6
: Compatible, : Partial change required, × : Incompatible
Number
Name Compat-
ibility
Precautions for replacement
AJ61BT11/A1SJ61BT11 QJ61BT11N
SB0069 Module mode -
The mode is set on the Q series
using the network parameters.
(The setting can be checked in
SW0060.)
SB006F -
Setting status of block
guarantee of cyclic data per
station
Added on the Q series and
replacement is not applied.
SB0079
-
Master station return
specification information
Added on the Q series and
replacement is not applied.
SB007B
Host master/standby master
operation status
SB007C
Slave station refresh/
compulsory clear setting status
in case of programmable
controller CPU STOP
SB00B4
Standby master station test
result
SB0184
Transmission speed test result
for standby master station
SB0185
Transmission speed test
accept status
SB0186
Transmission speed test
completion status
To Next Page
Loading...
