Mitsubishi Electric MELSEC-F Series - Output Specifications; Internal Output Circuit

2 Specification
2.5 Output Specifications
18
FX3U-1PG User's Manual
2.5 Output Specifications
2.5.1 Output specifications
2.5.2 Internal output circuit
For the internal output circuit diagram, refer to the following.
→ Refer to Section 5.2.
Item Specification
Output signal name
Group 1
FP: Forward pulse or pulse train
RP: Reverse pulse or direction signal
Group 2 CLR: CLR signal
Group 1
Output form Transistor
Output system
Forward (FP) and reverse (RP) pulse or pulse (PLS) with direction (DIR) can be
selected.
Output frequency 1 Hz to 200 kHz
Rated load voltage 5 to 24 V DC
Max. load current 20 mA or less
VIN current consumption 5 to 24 V DC 35 mA or less
Output ON voltage 1.0 V or less
Operation display LED ON at output ON
Group 2
Output form Transistor
Output system Pulse (Output pulse width: 20 ms)
Rated load voltage 5 to 24 V DC
Max. load current 20 mA or less
Output ON voltage 1.5 V or less
Operation display LED ON at output ON