Mitsubishi Electric MELSEC iQ-R08ENCPU - DNS Settings; FTP Client Settings; Response Monitoring Timer

2 PARAMETER SETTINGS
2.3 Application Settings
253
2
■Response Monitoring Timer
Set the monitoring time for a response from the CPU module after the Ethernet-equipped module receives the request data
from the external device and requests the CPU module for read/write.
It is recommended to use the default value (5s) for this timer value as much as possible.
When changing the setting value, determine the response monitoring timer value upon consulting with the system
administrator.
Set a value within the following range.
FTP Client Settings
Set the file transfer function (FTP client).
DNS Settings
Set the IP address of the DNS server.
Set the IP address in the following cases.
• When "FTP Server Specification" in "FTP Client Settings" is set to "FTP Server Name"
• When the FTP server is specified with the server name for the data logging file transfer function.
When "To Use or Not to Use DNS Server Settings" is set to "Use", set either one or both "DNS Server 1
Address" and "DNS Server 2 Address".
Unit Setting range
s 1 to 16383
ms 100 to 16383000 (in increments of 100ms)
Item Description Setting range
To Use or Not to Use FTP Client Settings Set whether to use the file transfer function (FTP client) or not. • Not Use
•Use
(Default: Not Use)
FTP Server Specification Set the specification method of the FTP server. • FTP Server Name
• FTP Server IP Address
(Default: FTP Server Name)
FTP Server Name Set the FTP server name (domain name) of the connection destination. 1 to 256 characters
FTP Server IP Address Set the IP address of the FTP server of the connection destination in
the decimal format.
0.0.0.1 to 223.255.255.254
Login Name Set the login name for login to the FTP server. 1 to 32 characters
Password Set the password for login to the FTP server. 0 to 32 characters
Connection Method Set the connection method of the FTP server. • PORT Mode
• PASV Mode
(Default: PORT Mode)
Port No. Set the port number for control of the FTP server. 1 to 65535
(Default: 21)
Item Description Setting range
To Use or Not to Use DNS Server Settings Set whether to use the DNS server or not. • Not Use
•Use
(Default: Not Use)
DNS Server 1 Address Set the IP address of the DNS server 1 in the decimal format. 0.0.0.1 to 223.255.255.254
DNS Server 2 Address Set the IP address of the DNS server 2 in the decimal format. 0.0.0.1 to 223.255.255.254