2 PARAMETER SETTINGS
2.3 Application Settings
279
2
*1 When the communication destination is an "SLMP-compatible device (QnA-compatible 3E frame)", the value is fixed at 65535ms.
*2 When the communication destination is an "SLMP-compatible device (QnA-compatible 3E frame)", the value is fixed at 0.
Communication Destination Setting
The following table lists the communication destination setting specified for the simple CPU communication.
Comment Sets a comment for the setting number, if required. 32 one-byte characters (16 double-
byte characters) maximum
(Default: Blank)
Item Description Setting range
Device Type Specify the device type of the communication destination. • MELSEC iQ-R (built-in Ethernet)
• MELSEC iQ-F (built-in Ethernet)
• MELSEC-Q (built-in Ethernet)
• MELSEC-L (built-in Ethernet)
• SLMP-compatible device (QnA-compatible 3E
frame)
(Default: Blank)
IP Address Enter the IP address of the communication destination. 0.0.0.1 to 223.255.255.254
(Default: Blank)
Port No. Set the port number of the communication destination. • SLMP-compatible device (QnA-compatible 3E
frame): 1 to 4999, 5010 to 65534
• Other than the above: Setting not required
(Default: Blank)
Host Station Port No. Set the port number of the own station. • SLMP-compatible device (QnA-compatible 3E
frame): 1 to 4999, 5010 to 65534
• Other than the above: Setting not required
(Default: Blank)
Item Description Setting range
To Next Page
Loading...
