44
2 PARAMETER SETTINGS
2.2 Basic Setting
2.2
Basic Setting
Set the operation mode, IP address, and other items of the RJ71EIP91.
Various Operations Settings
Set the operation mode of the RJ71EIP91.
Own Node Setting
Set the IP address of the RJ71EIP91.
*1 Cannot be set when "Mode Settings" is set to "Automatically H/W Test".
*2 When the parameter is written without the IP address setting (blank), the following address is set.
192.168.3.3
Item Description Setting range
Mode Settings Sets the operation mode of the RJ71EIP91.
• Online: Normal operation mode
• Automatically H/W Test: Mode in which the module performs a self-diagnostics
test. Select this mode when checking the operation of the module due to an error
or similar problem.
• Online
• Automatically H/W Test
(Default: Online)
Item Description Setting range
IP Address
Setting
*1
IP Address Sets the IP address of the RJ71EIP91.
*2
Set the class and subnet address of the RJ71EIP91 to the same settings as those of
the EtherNet/IP devices that communicate with the RJ71EIP91. Contact the network
administrator before setting the IP address.
•Blank
• 0.0.0.1 to 223.255.255.254
(Default: Blank)
Subnet Mask Sets the subnet mask of the RJ71EIP91.
When setting the IP address of the default gateway and performing communication
with an EtherNet/IP device in another network through a router, set the subnet mask
pattern of the default gateway. All the devices in the same subnetwork should have a
common subnet mask. The subnet mask setting is not required for communication in
a single network.
•Blank
• 128.0.0.0 to 255.255.255.252
(Default: Blank)
Default Gateway Sets the default gateway of the RJ71EIP91.
Set the IP address of the relay device (default gateway) to access the EtherNet/IP
device in another network.
Set a value that satisfies the following conditions as the IP address of the default
gateway.
• The class of the IP address is A, B, or C.
• The subnet address of the default gateway is the same as that of the RJ71EIP91.
• The host address part is not a sequence of "0" or "1".
•Blank
• 0.0.0.1 to 223.255.255.254
(Default: Blank)
To Next Page
Loading...
