Mitsubishi Electric MELSEC iQ-RJ71EIP91 - Chapter 3 EtherNet;IP Configuration Tool

2 PARAMETER SETTINGS
2.5 Setting EtherNet/IP Communications (Starting EtherNet/IP Configuration Tool)
47
2
2.5 Setting EtherNet/IP Communications (Starting
EtherNet/IP Configuration Tool)
Start EtherNet/IP Configuration Tool, and then set EtherNet/IP communications.
For details, refer to the following.
Page 49 EtherNet/IP Configuration Tool
• Even if the engineering tool is closed while EtherNet/IP Configuration Tool is starting, it can operate
independently. Configuration tool operations can continue.
• While EtherNet/IP Configuration Tool is running, another EtherNet/IP Configuration Tool cannot be started.