Mitsubishi Electric MELSEC iQ-RJ71GF11-T2 - Page 107

1 FUNCTIONS
1.7 Redundant System Function
105
1
4. Click the [OK] button to add a module label of the RJ71GF11-T2.
5. Set the network topology in the following item.
[Navigation window]  [Parameter]  [Module Information]  [RJ71GF11-T2(LR)]  [Basic Settings]  [Network
Topology]
6. Set the network configuration as follows.
[Navigation window]  [Parameter]  [Module Information]  [RJ71GF11-T2(LR)]  [Basic Settings]  [Network
Configuration Settings]
7. Set the refresh settings as follows.
[Navigation window]  [Parameter]  [Module Information]  [RJ71GF11-T2(LR)]  [Basic Settings]  [Refresh
Settings]