Mitsubishi Electric MELSEC iQ-RJ71GF11-T2 - Page 295

APPX
Appendix 3 Buffer Memory
293
A
PORT1 line error occurrence rate (max.)
The receive frame error occurrence rate (maximum value) on the PORT1 side is stored.
Note that no value is stored in the area for the station number of the own station.
■PORT1 line error occurrence rate (max.) (station No.1) (Un\G29968)
The receive frame error occurrence rate (maximum value) of station No.1 is stored.
■PORT1 line error occurrence rate (max.) (station No.2 to 120) (Un\G29969 to Un\G30087)
The receive frame error occurrence rate (maximum value) of station No.2 to 120 is stored.
■PORT1 line error occurrence rate (max.) (station No.0) (Un\G30088)
The receive frame error occurrence rate (maximum value) of station No.0 is stored.
PORT1 line error occurrence rate (present)
The receive frame error occurrence rate (present value) on the PORT1 side is stored.
Note that no value is stored in the area for the station number of the own station.
■PORT1 line error occurrence rate (present) (station No.1) (Un\G30096)
The receive frame error occurrence rate (present value) of station No.1 is stored.
■PORT1 line error occurrence rate (present) (station No.2 to 120) (Un\G30097 to Un\G30215)
The receive frame error occurrence rate (present value) of station No.2 to 120 is stored.
■PORT1 line error occurrence rate (present) (station No.0) (Un\G30216)
The receive frame error occurrence rate (present value) of station No.0 is stored.
PORT2 line error occurrence rate (max.)
The receive frame error occurrence rate (maximum value) on the PORT2 side is stored.
Note that no value is stored in the area for the station number of the own station.
■PORT2 line error occurrence rate (max.) (station No.1) (Un\G30224)
The receive frame error occurrence rate (maximum value) of station No.1 is stored.
■PORT2 line error occurrence rate (max.) (station No.2 to 120) (Un\G30225 to Un\G30343)
The receive frame error occurrence rate (maximum value) of station No.2 to 120 is stored.
■PORT2 line error occurrence rate (max.) (station No.0) (Un\G30344)
The receive frame error occurrence rate (maximum value) of station No.0 is stored.
PORT2 line error occurrence rate (present)
The receive frame error occurrence rate (present value) on the PORT2 side is stored.
Note that no value is stored in the area for the station number of the own station.
■PORT2 line error occurrence rate (present) (station No.1) (Un\G30352)
The receive frame error occurrence rate (present value) of station No.1 is stored.
■PORT2 line error occurrence rate (present) (station No.2 to 120) (Un\G30353 to Un\G30471)
The receive frame error occurrence rate (present value) of station No.2 to 120 is stored.
■PORT2 line error occurrence rate (present) (station No.0) (Un\G30472)
The receive frame error occurrence rate (present value) of station No.0 is stored.