Mitsubishi Electric MELSEC iQ-RJ71GF11-T2 - Page 298

296
APPX
Appendix 4 List of Link Special Relay (SB)
SB0030 RECV execution request flag CH1 Stores the data reception status of own station channel 1.
Off: No data received
On: Data received
(Conditions)
• This relay is enabled when 'Baton pass status of own station'
(SB0047) is off.
• When 'Baton pass status of own station' (SB0047) is turned on,
data prior to error is held.

SB0031 RECV execution request flag CH2 Stores the data reception status of own station channel 2.
Off: No data received
On: Data received
(Conditions)
• This relay is enabled when 'Baton pass status of own station'
(SB0047) is off.
• When 'Baton pass status of own station' (SB0047) is turned on,
data prior to error is held.

SB0032 RECV execution request flag CH3 Stores the data reception status of own station channel 3.
Off: No data received
On: Data received
(Conditions)
• This relay is enabled when 'Baton pass status of own station'
(SB0047) is off.
• When 'Baton pass status of own station' (SB0047) is turned on,
data prior to error is held.

*1

*1
SB0033 RECV execution request flag CH4 Stores the data reception status of own station channel 4.
Off: No data received
On: Data received
(Conditions)
• This relay is enabled when 'Baton pass status of own station'
(SB0047) is off.
• When 'Baton pass status of own station' (SB0047) is turned on,
data prior to error is held.

*1

*1
SB0034 RECV execution request flag CH5 Stores the data reception status of own station channel 5.
Off: No data received
On: Data received
(Conditions)
• This relay is enabled when 'Baton pass status of own station'
(SB0047) is off.
• When 'Baton pass status of own station' (SB0047) is turned on,
data prior to error is held.

*1

*1
SB0035 RECV execution request flag CH6 Stores the data reception status of own station channel 6.
Off: No data received
On: Data received
(Conditions)
• This relay is enabled when 'Baton pass status of own station'
(SB0047) is off.
• When 'Baton pass status of own station' (SB0047) is turned on,
data prior to error is held.

*1

*1
SB0036 RECV execution request flag CH7 Stores the data reception status of own station channel 7.
Off: No data received
On: Data received
(Conditions)
• This relay is enabled when 'Baton pass status of own station'
(SB0047) is off.
• When 'Baton pass status of own station' (SB0047) is turned on,
data prior to error is held.

*1

*1
SB0037 RECV execution request flag CH8 Stores the data reception status of own station channel 8.
Off: No data received
On: Data received
(Conditions)
• This relay is enabled when 'Baton pass status of own station'
(SB0047) is off.
• When 'Baton pass status of own station' (SB0047) is turned on,
data prior to error is held.

*1

*1
No. Name Description Availability
Master station
(submaster
station)
Local station