Mitsubishi Electric MELSEC iQ-RJ71GF11-T2 - Page 72

70
1 FUNCTIONS
1.6 Submaster Function
Link device assignment of the master station, submaster station, and slave stations
The following are assignment examples of when salve stations are connected to the master station and submaster station.
■Master station and local stations
*1 Data that is sent from "Range of the station No.0 sending data" and stored in RY/RWw is stored.
*2 Data that is sent from "Range of the station No.3 sending data" and stored in RY/RWw is stored.
Local station
RX, RWr
RY, RWw
Station No.1
Local station
RX, RWr
RY, RWw
Station No.2
Submaster
station
RX, RWr
RY, RWw
Station No.3
Station
No.2
Station
No.0
Station
No.3
Station
No.3
Station
No.1
Station
No.0
Station
No.2
Station
No.1
Station
No.0
Master station
Station
No.1
Station
No.0
Station
No.2
Station
No.3
Station
No.1
Station
No.0
*1
Station
No.2
Station
No.3
Station
No.1
Station
No.0
*1
Station
No.2
Station
No.3
Station
No.1
Station
No.0
Station
No.2
Station
No.3
RX, RWr
RY, RWw
Station No.0
Switch
Range of the
station No.1
sending data
Range of the
station No.2
sending data
Range of the
station No.3
sending data
Range of the
sending data to
the station No.1
Range of the
station No.0
sending data
Range of the
sending data to
the station No.2
Range of the
sending data to
the station No.3
Local station
RX, RWr
RY, RWw
Station No.1
Local station
RX, RWr
RY, RWw
Station No.2
Submaster
station
RX, RWr
RY, RWw
Station No.3
Station
No.2
Station
No.0
Station
No.3
Station
No.2
Station
No.3
Station
No.3
Station
No.1
Station
No.1
Station
No.0
Master station
Station
No.1
Station
No.0
Station
No.2
Station
No.3
RX, RWr
RY, RWw
Station No.0
Range of the
station No.1
sending data
Range of the
station No.2
sending data
Range of the
station No.0
sending data
Range of the
sending data to
the station No.1
Range of the
sending data to
the station No.0
Range of the
sending data to
the station No.2
Range of the
station No.3
sending data
Master operation
Master operation
Submaster operation
Disconnected
Station
No.1
Station
No.0
Station
No.2
Station
No.3
*2
Station
No.1
Station
No.0
Station
No.2
Station
No.3
*2
Station
No.1
Station
No.0
Station
No.2
Station
No.3
Area where data is sent to other stationsData sent from the master operating station
Data sent from slave stations