APPENDIX
App. - 6
(e) Use the surge protector of RSPD-250-U4 manufactured by Okaya Electric Industries.
(8) Performing EMC tests
When EMC tests are run on a machine and device into which the servo amplifier has been installed, it
must conform to the electromagnetic compatibility (immunity/emission) standards after it has satisfied
the operating environment/electrical equipment specifications.
For EMC directive conforming methods about servo amplifiers, refer to the EMC Installation Guidelines
(IB(NA)67310).
(9) Short Circuit Current Rating (SCCR)
We confirmed in the short-circuit test that this servo amplifier is suitable for use in a circuit rated at 100
kA RMS or less, and maximum voltage 500 V.
(10) Configuration diagram
Refer to App. 5 (9) for configuration diagram.
App. 5 Compliance with UL/CSA standard
This servo amplifier is designed to comply with UL 508C and CSA C22.2 No.14 standard.
For the situation of safety certification, contact your local sales office.
(1) Servo amplifiers and servo motors used
Use servo amplifiers and servo motors which standard product.
Servo motor
Servo amplifier
HG-MR HG-KR HG-SR
MR-J4-10A 053/13 053/13
MR-J4-20A 23 23
MR-J4-40A 43 43
MR-J4-60A 51/52
MR-J4-70A 73 73
MR-J4-100A 81/102
MR-J4-200A 121/152/201/202
MR-J4-350A 301/352
MR-J4-500A 421/502
MR-J4-700A 702
To Next Page
Loading...
