5 - 4
5 MECHANICAL SYSTEM PROGRAM
(a) Transmission modules which can be connected at "A" and "B" above
1) A clutch, speed change gear, and "clutch + speed change gear" can be
connected at "A" and "B".
2) If a "clutch + speed change gear" are used, connection constraints have
not restrictions.
Clutch
Speed
change gear
Clutch
Speed
change gear
Clutch
Speed
change gear
(b) Transmission module which can be connected at "C" (pattern 3)
Only a clutch can be connected at "C".
To Next Page
Loading...
