1 - 9
1 OVERVIEW
Programming software version
MELSOFT MT Works2 (MT Developer2)
Q173DSCPU/Q172DSCPU Q173DCPU(-S1)/Q172DCPU(-S1)
MR Configurator2 MR Configurator
Section of reference
— — — — (Note-4)
1.39R 1.39R — — (Note-3)
1.39R 1.39R — — (Note-3)
— — — — (Note-3)
— — — — Section 4.3
1.39R 1.39R — — (Note-6)
— Not support — — (Note-4)
— — — — (Note-5)
— Not support — — (Note-5)
1.47Z Not support — — (Note-7)
1.47Z Not support — — (Note-5)
— Not support — — (Note-5)
1.56J Not support — — (Note-5)
1.56J Not support — — (Note-5)
1.56J Not support — — (Note-3)
1.56J Not support — — (Note-4)
1.56J Not support — — (Note-4)
1.56J Not support — — (Note-4)
1.56J Not support — — (Note-7)
1.56J Not support — — (Note-7)
—: There is no restriction by the version.
(Note-1): SV13/SV22 is the completely same version.
(Note-2): The operating system software version can be confirmed in the operating system software (CD-ROM), MT Developer2 or
GX Works2/GX Developer. (Refer to "Q173D(S)CPU/Q172D(S)CPU Motion controller Programming Manual (COMMON) Section
1.3, 1.4".)
(Note-3): Q173D(S)CPU/Q172D(S)CPU Motion controller (SV13/SV22) Programming Manual (Motion SFC)
(Note-4): Q173D(S)CPU/Q172D(S)CPU Motion controller (SV13/SV22) Programming Manual (REAL MODE)
(Note-5): Q173D(S)CPU/Q172D(S)CPU Motion controller Programming Manual (COMMON)
(Note-6): Q173D(S)CPU/Q172D(S)CPU Motion controller Programming Manual (Safety Observation)
(Note-7): Q173DSCPU/Q172DSCPU Motion controller (SV22) Programming Manual (Advanced Synchronous Control)
To Next Page
Loading...
