Mitsubishi Electric Q172DCPU - APPENDIX 1 Cables

App - 1
A
PPENDICES
APPENDICES
APPENDIX 1 Cables
In this cable connection diagram, maker names of connectors are omitted. Refer to
"APPENDIX 2.7 Connector" for maker names of connectors.
APPENDIX 1.1 SSCNET cables
Generally use the SSCNET cables available as our products.
(1) Model explanation
Numeral in the column of cable length on the table is a symbol put in the " " part
of cable model. Cables of which symbol exists are available.
Cable length [m(ft.)]
Cable model
0.15
(0.49)
0.3
(0.98)
0.5
(1.64)
1
(3.28)
3
(9.84)
5
(16.40)
10
(32.81)
20
(65.62)
30
(98.43)
40
(131.23)
50
(164.04)
Flex life
Application/
remark
MR-J3BUSM 015 03 05 1 3 Standard
Standard code for
inside panel
MR-J3BUSM-A 5 10 20 Standard
Standard cable for
outside panel
MR-J3BUSM-B
(Note-1)
30 40 50 Long flex
Long distance
cable
(Note-1) : For the cable of less than 30[m](98.43[ft.]), contact your nearest Mitsubishi sales representative.
(2) Specifications
Description
SSCNET cable model MR-J3BUS M MR-J3BUS M-A MR-J3BUS M-B
SSCNET cable length [m(ft.)]
0.15
(0.49)
0.3 to 3
(0.98 to 9.84)
5 to 20
(16.40 to 65.62)
30 to 50
(98.43 to 164.04)
Minimum bend radius
[mm(inch)]
25(0.98)
Reinforcing coat cable: 50 (1.97)
Code: 25 (0.98)
Reinforcing coat cable: 50 (1.97)
Code : 30(1.18)
Tension strength [N] 70 140 420 (Enforced covering cord) 980 (Enforced covering cord)
Temperature range
for use [°C(°F)]
(Note-1)
-40 to 80
(-40 to 176)
-20 to 70
(-4 to 158)
Ambient Indoors (no direct sunlight), No solvent or oil
Optical cable
(Code)
External appearance
[mm(inch)]
(0.09 0.003)
2.2 0.07
4.4 0.1
(0.17 0.004)
(0.09 0.003)
2.2 0.07
(
0.09 0.003
)
2.2 0.07
4.4 0.1
(0.17 0.004)
6 0.2
(0.24 0.008)
4.4 0.4
(0.17 0.016)
7.6 0.5
(0.30 0.02)
(
0.09 0.008
)
2.2 0.2
(Note-1): This temperature range for use is the value for optical cable (cord) only.
App.