2 - 61
2 SYSTEM CONFIGURATION
2.4.7 Manual pulse generator/Serial absolute synchronous encoder
(1) Table of the Manual pulse generator specifications
Item Specifications
Model name MR-HDP01
(Note-1)
Ambient temperature -10 to 60°C(14 to 140°F)
Pulse resolution 25PLS/rev(100 PLS/rev after magnification by 4)
Output method
Voltage-output(power supply voltage -1V or more)/
Output current = Up to 20mA
Power supply voltage 4.5 to 13.2VDC
(Note-2)
Current consumption 60mA
Life time 1,000,000 revolutions (at 200r/min)
Permitted axial loads Radial load : Up to 19.6N, Thrust load : Up to 9.8N
Mass 0.4kg
Number of max. revolution Instantaneous Up to 600r/min. normal 200r/min
Pulse signal status
2 signals : A phase, B : phase, 90° phase difference
Friction torque 0.1N/m(20°C (68°F) )
(Note-1) : It can be used by combining with Q173DPX.
(Note-2) : If a separate power supply is used, use a stabilized power supply of voltage 5VDC ±
0.25V.
To Next Page
Loading...
