Mitsubishi Electric Q26UD(E)HCPU - CHAPTER 7 POWER SUPPLY MODULE

185
CHAPTER 6 CPU MODULE
6
6.6 Automatic Write to the Standard ROM
6.6 Automatic Write to the Standard ROM
The High Performance model QCPU, Process CPU and Redundant CPU allow data in the memory card to be written
into the standard ROM automatically.Note 6.1
For details, refer to the following.
Qn(H)/QnPH/QnPRHCPU User's Manual (Function Explanation, Program Fundamentals)
(1) Procedures for automatic write to the standard ROM
Automatic write to the standard ROM is performed with the following procedures.
(a) Operation with programming tool (setting automatic write to the standard ROM)
Project window [Parameter] [PLC Parameter] [Boot File]
1. Check the "Auto Download All Data from Memory Card to Standard ROM".
2. Set the parameter and program to be booted in the "Boot File" tab.
(Set the "Transfer from" to "Standard ROM".)
3. Store the set parameters and programs to be booted in the memory card.
Note 6.1
For the Basic model QCPU and Universal model QCPU, automatic write to the standard ROM is not available.
Note 6.1
Basic
Universal
Check "Auto Download
All Data from Memory
Card to Standard ROM ".
Set "Transfer from" to
"Standard ROM".