Mitsubishi Electric Q26UD(E)HCPU - Installing and Removing a Memory Card

95
CHAPTER 4 INSTALLATION AND WIRING
4
4.5 Installing and Removing a Memory Card
4.5 Installing and Removing a Memory Card
This section describes a procedure for installing and removing a memory card. Note 4.1
(1) For Q2MEM type memory cards
(a) Installing a memory card
Pay attention to the direction of a memory card.
Insert the card securely into the connector of a CPU module until the height of the card reaches that of the
memory card EJECT button.
(b) Removing a memory card
Press the memory card EJECT button and pull out the memory card.
Note 4.1
The Basic model QCPU, Q00U(J)CPU, Q01UCPU, and QnUDVCPU do not support the use of a memory card.
Note 4.1
Basic
Universal
Memory card
EJECT button
Memory card
CPU module
Insertion direction check
( mark)
Memory card
Push
Memory card
EJECT button
CPU module