249
CHAPTER 12 BATTERY
12
12.2 Battery Installation
12.2 Battery Installation
(1) Q6BAT battery installation procedure
The battery connector of Q6BAT is disconnected when shipping. Connect the connector as follows.
For the service life of the battery and how to replace the battery, refer to Page 255, Section 13.3.
(a) Basic model QCPU
(b) High Performance model QCPU, Process CPU, Redundant CPU and Universal model
QCPU
Firmly push the connector all the way.
CPU module
Connector
Completed
Insert the battery connector into the
connector pin on the case. Be sure that
the insertion direction is correct.
Open the CPU module front cover.
Confirm that the battery is loaded
correctly.
Completed
Insert the battery connector into the
connector pin on the case. Be sure that
the insertion direction is correct.
Open the CPU module bottom cover.
Confirm that the battery is loaded
correctly.
Battery
Connector
Connector
stopper
CPU module
To Next Page
Loading...
