198
*1 For the description of the specifications, refer to Page 213, Section 7.2.2.
Item
Performance Specifications
Q63P
Mounting position Power supply module mounting slot
Applicable base unit Q3B, Q3DB, Q6B
Input power supply
24VDC
(15.6 to 31.2VDC)
Input frequency ----
Input voltage distortion
factor
----
Max. input power 45W
Inrush current 100A within 1ms (at 24VDC input)
Rated output
current
5VDC 6A
24VDC ----
External output voltage ----
Overcurrent
protection
*1
5VDC 6.6A or more
24VDC ----
Overvoltage
protection
*1
5VDC 5.5 to 6.5V
24VDC ----
Efficiency 70% or more
Allowable momentary
power failure time
*1
Within 10ms
(at 24VDC input)
Dielectric withstand voltage
510VAC per minute (altitude 0 to 2000m)
Between the combined "line input/LG terminals" and the "FG terminal and output"
Insulation resistance 10M or more by insulation resistance tester
Noise durability By noise simulator of 500Vp-p noise voltage, 1µs noise width and 25 to 60Hz noise frequency
Operation indication LED indication (Normal: On (green), Error: Off)
Fuse Built-in (User-unchangeable)
Contact output section
Application
ERR.
contact ( Page 188, Section 7.1)
Rated switching
voltage, current
24VDC, 0.5A
Minimum switching
load
5VDC, 1mA
Response time OFF to ON: 10ms max. ON to OFF: 12ms max.
Life
Mechanical : More than 20 million times
Electrical : More than 100 thousand times at rated switching voltage, current
Surge suppressor None
Fuse None
Terminal screw size M3.5
Applicable wire size
0.75 to 2mm
2
Applicable solderless
terminal
RAV1.25 - 3.5, RAV2 - 3.5, thickness 0.8mm or less. Two solderless terminals can be connected to one
terminal.
Applicable tightening torque 0.66 to 0.89N•m
External
dimensions
H 98mm
W 55.2mm
D 90mm
Weight 0.33kg
To Next Page
Loading...
