203
CHAPTER 7 POWER SUPPLY MODULE
7
7.2 Specifications
7.2.1 Power supply module specifications
*1 For the descriptions of the specification items, refer to Page 213, Section 7.2.2.
*2 Although the POWER LED momentarily turns on in red immediately after the power supply is turned on or off, the
Q63RP is not faulty.
Item
Performance Specifications
Q63RP
Base unit position Power supply module mounting slot
Applicable base unit Q3RB, Q3RB, Q6WRB
Input power supply 24V DC(-35%/+30%) (15.6 to 31.2V DC)
Max. input power 65W
Inrush current 150A within 1ms
Rated output
current
5VDC 8.5A
24VDC ----
Overcurrent
protection
*1
5VDC 9.35A or more
24VDC ----
Overvoltage
protection
*1
5VDC 5.5 to 6.5V
24VDC ----
Efficiency 65% or more
Allowable momentary
power failure time
*1
Within 10ms (at 24V DC input)
Dielectric withstand
voltage
510VAC per minute (altitude 0 to 2000m)
Between the combined "line input/LG terminals" and the "FG terminal and output"
Insulation resistance 10M or more by insulation resistance tester
Noise durability
By noise simulator of 500Vp-p
noise voltage, 1µs noise width and 25 to 60Hz
noise frequency
Operation indication
LED indication
*2
(Normal operation: On (green) Error: Off (red)
Fuse Built-in (User-unchangeable)
Contact output section
Application
ERR.
contact ( Page 188, Section 7.1)
Rated switching
voltage, current
24VDC, 0.5A
Minimum switching
load
5VDC, 1mA
Response time OFF to ON: 10ms max. ON to OFF: 12ms max.
Life
Mechanical : More than 20 million times
Electrical : More than 100 thousand times at rated switching voltage, current
Surge suppressor None
Fuse None
Terminal screw size M3.5 Screw
Applicable wire size
0.75 to 2mm
2
Applicable solderless
terminal
R1.25-3.5, R2-3.5, RAV1.25-3.5, RAV2-3.5, thickness 0.8mm or less. Two solderless terminals can be
connected to one terminal.
Applicable tightening
torque
0.66 to 0.89N•m
External
dimensions
H98mm
W83mm
D 115mm
Weight 0.60kg
To Next Page
Loading...
