303
CHAPTER 15 TROUBLESHOOTING
15
15.4 Saving Data
(2) Saving device data and buffer memory data
The following describes a procedure for saving data.
[Online] [Read from PLC]
When using a file register, also save file register data.
1. Select "Device Memory".
2. Click the button.
3. Fill in the "Device Data Name" field and select the
checkboxes of devices to be saved.
4. Enter the start I/O number in the "Buffer Memory
Start Address" field.
5. Click the button, and execute Read from
PLC.
To Next Page
Loading...
