Mitsubishi Electric Q26UD(E)HCPU - Page 452

450
CF10
H
iQ Sensor
Solution related
error
System error
• Check the operating status and connection
status of each device supporting iQ Sensor
Solution.
• Check the connection status of each Ethernet
cable and the hub.
• Check the line status of Ethernet.
• Reset the CPU module and devices supporting
iQ Sensor Solution, and execute the function
again.
• If the same error code is displayed again even
after the above actions are taken, please consult
the manufacturer of the device supporting iQ
Sensor Solution.
QnUDV
LCPU
CF20
H
iQ Sensor
Solution related
error
• The communication setting value is out of the
range.
• The communication setting item not supported
by the target device supporting iQ Sensor
Solution is set.
• The setting item required for the target device
supporting iQ Sensor Solution is not set.
Review the settings, and execute the function
again.
QnUDV
LCPU
CF30
H
iQ Sensor
Solution related
error
A parameter not supported by the target device
supporting iQ Sensor Solution was specified.
Check the version of the device supporting iQ
Sensor Solution.
QnUDV
LCPU
CF31
H
iQ Sensor
Solution related
error
System error
• Check the operating status and connection
status of each device supporting iQ Sensor
Solution.
• Check the connection status of each Ethernet
cable and the hub.
• Check the line status of Ethernet.
• If the same error code is displayed again even
after the above actions are taken, please consult
the manufacturer of the device supporting iQ
Sensor Solution.
QnUDV
LCPU
CF41
H
iQ Sensor
Solution related
error
The information required for monitoring cannot
be read from the device supporting iQ Sensor
Solution.
• Check the operating status and connection
status of each device supporting iQ Sensor
Solution.
• Reset the devices supporting iQ Sensor
Solution, and execute the function again.
• If the same error code is displayed again even
after the above actions are taken, please consult
the manufacturer of the device supporting iQ
Sensor Solution.
QnUDV
LCPU
CF50
H
iQ Sensor
Solution related
error
System error
• Check the operating status and connection
status of each device supporting iQ Sensor
Solution.
• Check the connection status of each Ethernet
cable and the hub.
• Check the line status of Ethernet.
• Reset the CPU module and devices supporting
iQ Sensor Solution, and execute the function
again.
• If the same error code is displayed again even
after the above actions are taken, please consult
the manufacturer of the device supporting iQ
Sensor Solution.
QnUDV
LCPU
CF51
H
iQ Sensor
Solution related
error
The function cannot be executed because the
function from another peripheral is being
executed.
Execute the function again after a while.
QnUDV
LCPU
Error code
(Hexadecimal)
Error item Error details Corrective action
Corresponding
CPU