Mitsubishi Electric Q26UD(E)HCPU - Page 526

524
SD204
LED
display
color
CPU-LED
display color
The LED display color of the LED status shown in SD201 1) to
8).
S (Status
change)
New LCPU
SD207
LED
display
priority
ranking
Priorities 1 to
4
• The priority of the LED indication in the case of an error is
set by a cause number. (For the Basic model QCPU, only
the annunciator (cause number 7) is available.)
• For the Universal model QCPU and LCPU, specify whether
to enable or disable LED indication of the error that has
priority when an error occurs.
• The setting areas for priorities are as follows:
[Default value]
SD207 = 4321
H
(0000
H
for Basic model QCPU) SD208 =
8765
H
(0700
H
for Basic model QCPU) (0765
H
for Redundant
CPU)
SD209 = 00A9
H
(0000
H
for Basic model QCPU) (0B09
H
for
Redundant CPU, CBA9
H
for LCPU)
• No indication if "0" is stored.
• For the Basic model QCPU, the ERR. LED lights up upon
turn-on of the annunciator, if "7" is stored in any of Priorities
1 to 11.
• For the Basic model QCPU, the ERR. LED does not light up
upon turn-on of the annunciator, if "7" is not stored in any of
Priorities 1 to 11. However, even if "7" is stored, the error,
which makes CPU module operation stop (including the
error that is specified with a parameter), will be indicated
with the LED without condition.
U
D9038
Q00J/Q00/Q01
*1
Qn(H)
QnPH
QnPRH
QnU
LCPU
SD208
Priorities 5 to
8
D9039
format change
SD209
Priorities 9 to
12
New
SD210 Clock data
Clock data
(year, month)
This register stores the year (last two digits) and month in BCD
as shown below.
S
(Request)/
U
D9025
QCPU
LCPU
Number Name Meaning Explanation
Set by
(When Set)
Corresponding
ACPU
D9
Corresponding
CPU
b15 b12 b11 b8 b7 b4 b3 b0
1)RUN LED
0: OFF
1: Green
2)ERROR LED
0: OFF
1: Red
3)USER LED
0: OFF
1: Red
4)BAT. LED
0: OFF
1: Yellow
2: Green
8)MODE LED
0: OFF
1: Green
5)Empty
6)Empty
7)
I/O ERR. LED
0: OFF
1: Red
SD207
SD208
SD209
b15 b12
to
Priority 4
Priority 8
Priority 12
(Priority 11 is valid when Redundant CPU is used.)
(Priority 12 is valid when LCPU is used.)
b11 b8
to
Priority 3
Priority 7
b3 b0
to
Priority 1
Priority 5
Priority 9
b7 b4
to
Priority 2
Priority 6
Priority 10Priority 11
b15
b12to b11
b8
to
b7
b4to
b3 b0
to
Example:
July, 1993
9307
H
Year
Month