540
SD620
Drive 3/4
types
Drive 3/4
types
This register stores the usage status of drives 3 and 4 in the
following bit pattern.
S (Initial) New
Q00J/Q00/Q01
This register stores the usage status of drives 3 and 4 in the
following bit pattern.
*1 For the Q00UJCPU, the drive 3 (Standard RAM) type is
fixed at "0".
Qn(H)
QnPH
QnPRH
QnU
LCPU
SD622
Drive 3
(Standard
RAM)
capacity
Drive 3
capacity
This register stores the drive 3 storage capacity (unit: 1K
byte).
S (Initial) New
Q00J/Q00/Q01
This register stores the drive 3 storage capacity (unit: 1K
byte). (Free space value after formatting is stored.)
Qn(H)
QnPH
QnPRH
QnU
LCPU
SD623
Drive 4
(Standard
ROM)
capacity
Drive 4
capacity
This register stores the drive 4 storage capacity (unit: 1K
byte).
S (Initial) New
Q00J/Q00/Q01
This register stores the drive 4 storage capacity (unit: 1K
byte). (Free space value after formatting is stored.)
Qn(H)
QnPH
QnPRH
QnU
LCPU
SD624
Drive 3/4
use
conditions
Drive 3/4 use
conditions
This register stores the usage status of the drives 3 and 4 in
the following bit pattern.
S (Status
change)
New
Q00J/Q00/Q01
This register stores the usage status of the drives 3 and 4 in
the following bit pattern. (Each bit is on while the
corresponding drive is being used.)
Qn(H)
QnPH
QnPRH
Number Name Meaning Explanation
Set by
(When Set)
Corresponding
ACPU
D9
Corresponding
CPU
b4 b3 b0
0
b8 b7b15
to toto
Drive 3
(Standard
RAM) type
Drive 4
(Standard
ROM) type
0: Absent
1: Present
"3 (FLASH ROM)"
0
b7
b4 b0
b15 b8 b3
to to
Drive 3
(Standard
RAM) type
Fixed to 1
Drive 4
(Standard
ROM) type
Fixed to 3
to
*1
0
b4 b0
b15
b5
00000
to to
Boot operation (QBT)
0: Not used 1: In use
File register (QDR)
0: Not used 1: In use
b0 : Boot operation (QBT)
b1 : Parameters (QPA)
b2 : Device comments (QCD)
b3 : Device initial value (QDI)
b4 : File register (QDR)
b5 : Sampling trace (QTD)
b6 : Not used
b7 : Not used
b8 : Not used
b9 : Error history (QFD)
b10 : SFC trace (QTS)
b11 : Local device (QDL)
b12 : Not used
b13 : Not used
b14 : Not used
b15 : Not used