Mitsubishi Electric Q26UD(E)HCPU - Page 642

640
*1 For details, refer to the following.
Qn(H)/QnPH/QnPRHCPU User's Manual (Function Explanation, Program Fundamentals)
*2 For details, refer to the following.
QCPU User's Manual (Multiple CPU System)
*3 For details, refer to the following.
MELSEC-Q/L/QnA Programming Manual (PID Control Instructions)
Multiple CPU system
*2
B
"02122" or later
Version 1.15R
or later
Version 7 or
later
Installation of a PC CPU module into a multiple CPU system
*2
"03051" or later
Version 7.10L or
later
High speed interrupt
*1
"04012" or later
Version 8 or
later
Index modification for module designation of dedicated
instruction ( Manuals of the intelligent function modules
that support the use of dedicated instructions)
---
Selection of refresh item for COM instruction ( MELSEC-
Q/L Programming Manual (Common Instruction))
Online change (files) of SFC programs
*1
"04122" or later
Version 1.15R
or later
Version 8 or
later
File memory capacity change
*1
CC-Link Remote network additional mode ( CC-Link
System Master/Local Module User's Manual)
"05032" or later
Version 8.03D
or later
Incomplete derivative PID operation function
*3
Floating-point comparison instruction speedup
---
Read of the SFC active step comment ( MELSEC-
Q/L/QnA Programming Manual (SFC))
"07012" or later
Error detection in the redundant power supply system
*1
"07032" or later
Version 1.15R
or later
Version 8.23Z or
later
Use of clock data of 1/1000 second
*1
---
Storage of sampling trace files in standard RAM
*1
Version 1.15R
or later
Version 8.23Z or
later
Individual setting of refresh device on multiple CPU system
*2
Execution status selection of the fall instruction during online
change
*1
"07092" or later
Version 8.27D
or later
CC-Link block data assurance per station ( CC-Link
System Master/Local Module User's Manual (Details))
"08032" or later
Version 8.32J or
later
Setting "8" for the number of modules in Network parameter for
CC-Link
( CC-Link System Master/Local Module User's Manual
(Details))
CC-Link IE Controller Network ( CC-Link IE Controller
Network Reference Manual)
"09012" or later
Version 8.45X
or later
ATA card (
Page 237, Section 9.2.1)
---
SRAM card (4M bytes) (
Page 237, Section 9.2.1)
"16021" or later
Function
Function
version
Serial
number (first
5 digits)
Programming tool version
GX Works2
GX
Developer