Mitsubishi Electric RV-8CRL - Parameter List - Settings and Language; Origin, Selection, and Communication Parameters; Task and Language Parameters

4 Software
List of parameters 4-95
User-designated origin USERORG Designate the user-designated origin position.
Program selection memory SLOTON Select the program selected previously when initializing the slot. The non-selected state
will
be entered when not set.
Communication setting CBAU232 Set the baud rate.
CLEN232 Set the character length.
CPRTY232 Set the parity.
CSTOP232 Set the stop bit.
CTERM232 Set the end code.
Slot table SLT1
:
SLT32
Make settings (program name, operation type, order of priority, etc.) for each slot during
slot initialization.
No. of multi-tasks TASKMAX Designate the No. of programs to be executed simultaneously. (Max. 32)
Select the function of
singular point adjacent
alarm
MESNGLS
W
Designate the valid/invalid of the singular point adjacent alarm. (Invalid/Valid =0/1)
When this parameter is set up "VALID", this warning sound is buzzing even if
parameter:
BZR (buzzer ON/OFF) is set up "OFF".
Display language LNG Sets the display language on the RT ToolBox3 (option).
Parameter Details