Mitsubishi Electric RV-8CRL - Controller Protection Box Specifications; Controller Protection Box Details

3-60
3 Controller
(3) Controller protection box
■Order type: CR800-MB
■Outline
Storing the controller in this box protects the controller from dust and water.
Use this option, when the controller is installed where environment is oil mist
such as machine shop etc.
■Configuration
Table 3-14: Configuration equipment and types
■Specifications
Table 3-15: Specifications
(1) The robot must be grounded by the customer.
(2) The customer needs to prepare the power cable for protection box fan and the grounding cable.
(Power supply voltage for fan: 200 VAC, Screw size for power supply connection terminal block: M4)
Part name Type Qty.
Mass
(Kg)
Note1)
Note1) Mass indicates one set.
Remarks
Controller protection box CR800-MB 1
21
-
Label for serial number - 1 -
Transparent seal - 1 -
Cable tie T50L 4 -
Screw for fixing of the controller
mounting plate
M4x8 4 -
Instruction Manual BFP-A3501 1 - -
Item Unit Specifications Remarks
Outside dimension mm 500(W)×725(D)×250(H) Protrusions such as rubber legs are excluded.
Mass kg 21 -
Construction -
IP54
Note1)
Note1) In the environment where oil, such as machining oil, drops on the controller protection box, provide a shield plate
to protect the controller protection box from the oil droplets.
Self-contained floor type
Grounding - 100 or less (class D grounding) -
Paint color - Dark gray Equivalent to Munsell: 3.5PB3.2/0.8, PANTONE:
432C