3-74
3 Controller
■Connections and outside dimensions
The sheath of each signal cable (40 lines) is color indicated and marked with dots. Refer to the cable color
specifications in "Table 3-36: Connector pin numbers and cable colors" when making the connections.
Fig.3-27: Connections and outside dimensions
(Eg.) Pin number: color indication
1 : Orange / Red / a
Type of dot mark (see figure
below)
Color of dot mark
Line color
type
a type
Pattern of the print mark
One dot
Two dots
Three dots
Four dots
b type
c type
d type
1A/C 1B/D
20A/C
20B/D
or
Plug (Fujitsu Ltd) Connector: FCN-361J040-AU
Cover : FCN-360C040-B
To Next Page
Loading...
