Liftgate (except for vehicles equipped with the power liftgate)
Features and controls 5-37
1. After unlocking, push the liftgate open
switch (A) and raise the liftgate.
1. Pull the liftgate grip (B) downward as
illustrated and release it before the liftgate
closes completely. Gently close the lift-
gate from the outside so that it is com-
pletely closed.
When opening the liftgate, always fully
open it. A partially opened liftgate can
unexpectedly close due to its own weight.
When the vehicle is parked on a slope, the
effort required to open or close the liftgate
may be greater or less than expected.
The liftgate may also open or close more
quickly.
Do not stand behind the exhaust pipe when
loading and unloading luggage. Heat from
the exhaust could lead to burns.
To avoid damage to the liftgate, make sure
that area above and behind the liftgate is
clear before opening it.
Locking and unlocking the doors by using
power door locks (driver and front passenger
side), keyless entry system, or F.A.S.T.-key
operation (vehicles equipped with the
F.A.S.T.-key) also locks and unlocks the lift-
gate.
To open
Make sure there is no one standing nearby
when opening the liftgate.
The liftgate cannot be raised if it is not raised
immediately after pressing the liftgate open
switch.
If this happens, raise the liftgate again after
pressing the liftgate open switch.
It is not possible to open the liftgate while
the battery is disconnected. If necessary, use
the inside liftgate release.
When the battery is reconnected, all doors
and the liftgate will be locked. Unlock them
before trying to open the liftgate.
On vehicles equipped with the mirror retrac-
tor switch, the outside rearview mirrors auto-
matically extend when the liftgate and all
doors are unlocked using the liftgate open
switch (A).
To close
To avoid injuring your hand or arm, do not
attempt to close the liftgate without releasing
the liftgate grip (B).
BK0223400US.book 37 ページ ２０１５年２月１３日 金曜日 午後１２時１５分
To Next Page
Loading...
Need help?
General
