EasyManuals Logo

Mitsubishi 2016 OUTLANDER User Manual

Mitsubishi 2016 OUTLANDER
464 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #250 background imageLoading...
Page #250 background image
Warning lights
5-174 Features and controls
5
N00520601323
This light comes on in the event of a malfunc-
tion in the charging system or when the igni-
tion switch is turned to the “ON” position
(engine off) or the operation mode is put in
ON. On vehicle equipped with the multi
information display - Type 1, a warning is
also displayed in the multi information dis-
play. When the engine is started, the light
should go out. Check to make sure that the
light has gone out before driving.
N00520701278
This light comes on when the engine oil pres-
sure is below normal. If the light stays on
while driving, stop the engine as soon as pos-
sible. Do not run the engine until the cause of
the low oil pressure is corrected.
CAUTION
Driving for a long time with the engine mal-
function indicator on may cause more dam-
age to the emission control system. This
could also affect fuel economy and drivabil-
ity.
If this indicator does not come on when the
ignition switch is turned to the “ON” posi-
tion or the operation mode is put in ON, have
the system checked at an authorized Mitsubi-
shi Motors dealer or a repair facility of your
choice.
If the engine malfunction indicator comes on
while the engine is running, avoid driving at
high speeds.
During vehicle operation with the indicator
on, the vehicle may not accelerate when you
depress the accelerator pedal.
When the vehicle is stationary with the indi-
cator on, you must depress the brake pedal
more firmly than usual since the engine
idling speed is higher than usual and a vehi-
cle with an automatic transaxle or CVT has a
stronger tendency to creep forward.
NOTE
Do not disconnect the battery cable when the
engine malfunction indicator (“SERVICE
ENGINE SOON” or “Check engine light”) is
on.
The engine electronic control module stores
critical OBD information (especially exhaust
emission data), which may be lost if the bat-
tery cable is disconnected while the engine
malfunction indicator is on. This will make it
difficult to diagnose the cause of future prob-
lems.
Charging system warning light
CAUTION
If the warning light stays on while the engine
is running, park your vehicle in a safe place
as soon as possible and contact an authorized
Mitsubishi Motors dealer or a repair facility
of your choice to have the system checked.
Oil pressure warning light
(Vehicle equipped with the
multi information display -
Type 2)
CAUTION
If this light comes on when the engine oil
level is not low, have your vehicle checked at
an authorized Mitsubishi Motors dealer or a
repair facility of your choice.
This warning light does not show the amount
of oil in the crankcase. This can only be
determined by checking the oil level with the
dipstick with the engine turned off.
BK0223400US.book 174 ページ 2015年2月13日 金曜日 午後12時15分
Information Provided by:

Table of Contents

Other manuals for Mitsubishi 2016 OUTLANDER

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mitsubishi 2016 OUTLANDER and is the answer not in the manual?

Mitsubishi 2016 OUTLANDER Specifications

General IconGeneral
BrandMitsubishi
Model2016 OUTLANDER
CategoryAutomobile
LanguageEnglish

Related product manuals