Free-hand Advanced Security Transmitter (F.A.S.T.-key) (if so equipped)
5-18 Features and controls
On vehicles equipped with the Mitsubishi
Multi-Communication System, it is possible
to change the setting by means of screen
operations.
Refer to the separate owner’s manual for
details.
N00529600114
The electronic immobilizer is designed to sig-
nificantly reduce the possibility of vehicle
theft. The purpose of the system is to immo-
bilize the vehicle if an invalid start is
attempted. A valid start attempt can only be
achieved (subject to certain conditions) using
a F.A.S.T.-Key “registered” to the immobi-
lizer system.
All of the keys provided with your new vehi-
cle have been programmed to the vehicle’s
electronics.
N00513501098
To prevent vehicle theft, no F.A.S.T.-keys
other than those registered in advance can be
used to start the engine. (Electronic immobi-
lizer function)
While carrying the F.A.S.T.-key, the engine
switch can be used to start the engine.
The indicator light on the engine switch turns
off.
The operation mode cannot be put in OFF
when the selector lever is in any position
other than the “P” (PARK) position.
Allows operation of electrical accessories.
On vehicles with F.A.S.T.-key and equipped
with the mirror retractor switch, the outside
rearview mirrors automatically retract when
all the doors and liftgate are locked using the
F.A.S.T.-key function.
Refer to “Features and controls: Outside
rearview mirrors” on page 5-57.
Electronic immobilizer (Anti-
theft starting system)
Engine switch
The indicator light (A) will flash orange
when there is a problem or malfunction in
Free-hand Advanced Security Transmitter.
Never drive if the indicator light on the
engine switch is flashing orange. Immedi-
ately contact your authorized Mitsubishi
Motors dealer.
If the engine switch operation is not smooth
and feels like it is sticking, do not operate the
switch.
Immediately contact an authorized Mitsubi-
shi Motors dealer.
When operating the engine switch, press the
switch all the way in. If the switch is not
fully pressed, the engine may not start or the
operation mode may not change. If the
engine switch is pressed correctly, there is no
need to hold the engine switch down.
Operation mode of the engine
switch and its function
OFF
ACC
BK0223400US.book 18 ページ ２０１５年２月１３日 金曜日 午後１２時１５分
To Next Page
Loading...
Need help?
General
