It is possible to move the mirror up/down and
left/right to adjust its position.
The day/night knob (A) at the bottom of the
mirror can be used to adjust the mirror to
reduce the glare from the headlights of vehi-
cles behind you during night driving.
When the headlights of the vehicles behind
you are very bright, the reflection factor of
the rearview mirror is automatically changed
to reduce the glare.
Normally, use the automatic mode. When the
ignition switch is turned to the “ON” position
or the operation mode is put in ON, the
reflection factor of the mirror is automatically
changed.
To adjust the mirror position To reduce the glare
Type 1
1- Daytime position
2- Night position
Type 2
Do not hang items on, or spray glass cleaner
on the sensor (1), as reduced sensitivity
could result.
BK0223400US.book 56 ページ ２０１５年２月１３日 金曜日 午後１２時１５分
To Next Page
Loading...
Need help?
General
