If you press the switch, you can change the
drive mode in the order of 4WD ECO, 4WD
AUTO, 4WD LOCK, 4WD ECO.
N00549401030
Normally the indicator illuminates when the
operation mode put in ON, and then the drive
mode is displayed a few seconds after the
engine is started.
The status of each drive mode display is as
follows.
On vehicles with color liquid crystal display
meter, the drive mode is displayed as an inter-
rupt display on the information screen in the
multi information display when the drive
mode is switched.
After a few seconds, the information screen
returns from the drive mode display to the
previous screen.
Do not operate the drive mode-selector with
the front wheels spinning on a snowy road or
in similar conditions. The vehicle could
lunge in an unexpected direction.
Driving on dry, paved roads in “4WD
LOCK” mode causes increased fuel con-
sumption and noise.