A- CRUISE CONTROL ON/OFF switch
Used to turn on and off the cruise control.
B- SET - switch
Used to reduce the set speed and to set the
desired speed.
C- RES + switch
Used to increase the set speed and to return to
the original set speed.
D- CANCEL switch
Used to deactivate the set speed driving.
N00518401395
1. With the operation mode in ON, press the
CRUISE CONTROL ON/OFF switch (A)
to turn on the cruise control. The indica-
tor/indicator display in the meter cluster
will come on.
Indicator
Indicator display
2. Accelerate or decelerate to your desired
speed, then push down and release the
SET - switch (B) when the indicator/indi-
cator display is illuminated. The vehicle
will then maintain the desired speed.
The “SET” indicator appears on the infor-
mation display in the meter cluster. (For
vehicles equipped with color liquid crys-
tal display meter)
N00518501354
There are 2 ways to increase the set speed.
Push up and hold the RES + switch (C) while
driving at the set speed, and your speed will
then gradually increase.
Cruise control switches
When operating the cruise control switches,
press the cruise control switches correctly.
The set speed driving may be deactivated
automatically if two or more switches of the
cruise control are pressed at the same time.
To activate
When you release the SET - switch (B), the
vehicle speed will be set.
To increase the set speed
RES + switch
BK0223400US.book 97 ページ ２０１５年２月１３日 金曜日 午後１２時１５分
To Next Page
Loading...
Need help?
General
