To return the display to 0, hold down the
multi information display switch for about 2
seconds or more. Only the currently dis-
played value will be reset.
Example
If trip odometer is displayed, only trip
odometer will be reset.
Both trip odometers and can
count up to 9999.9 miles/kilometers.
When a trip odometer goes past 9999.9
miles/kilometers, it returns to 0.0 miles/
kilometers.
When disconnecting the battery terminal,
the memories of trip odometer displays
and are cleared, and their displays
return to “0.0 miles/kilometers”.
N00556701237
Displays the approximate time until the next
recommended periodic inspection. “---” is
displayed when the inspection time has
arrived.
1. Shows the time until the next periodic
inspection.
2. This informs you that a periodic inspec-
tion is due. Contact an authorized Mit-
subishi Motors dealer or a repair facility
of your choice to have the system
checked.
At that time, when the ignition switch is
switched from the “OFF” or “LOCK”
position to the “ON” position or the oper-
ation mode is changed from OFF to ON,
the warning display is displayed for a few
seconds on the information screen.
3. After your vehicle is inspected at an
authorized Mitsubishi Motors dealer, it
displays the time until the next periodic
inspection.
The “---” display can be reset while the igni-
tion switch or the operation mode is in OFF.
Usage examples for trip odometer , trip
odometer
It is possible to measure two currently
traveled distances, from home using
trip odometer and from a particular
point on the way using trip odometer
.
To reset the trip odometer
Service reminder
The service reminder time can be modified
by an authorized Mitsubishi Motors dealer,
to adjust for severe usage, etc. Refer to
“Severe maintenance schedule” in your vehi-
cle’s Warranty and Maintenance Manual. For
further information, please contact your
authorized Mitsubishi Motors dealer.
To Next Page
Loading...
Need help?
General
