Mitsubishi 2016 OUTLANDER

Indicator light, warning light, and information screen display list (multi information display - Type 1)
Features and controls 5-165
5
 There is a fault in the Adaptive Cruise Control Sys-
tem (ACC).
 Contact an authorized Mitsubishi Motors dealer or a
repair facility of your choice to have the system
checked.
Refer to “When ACC detects a vehicle in front
within the set distance” on page 5-104.
 There is a fault in the Forward Collision Mitigation
System (FCM).
 Contact an authorized Mitsubishi Motors dealer or a
repair facility of your choice to have the system
checked.
Refer to “FCM ON/OFF switch: When a problem is
detected” on page 5-114.
 FCM braking function of the Forward Collision Mit-
igation System (FCM) has been activated.
Refer to “FCM braking function” on page 5-112.
 The Forward Collision Mitigation System (FCM) is
temporarily unavailable due to conditions such as the
adhesion of contaminants to the sensor.
This is not a malfunction.
 The Lane Departure Warning (LDW) has detected
that your vehicle is about to leave or has left the lane.
Refer to “Lane Departure Warning (LDW)” on page
5-116.
 The Lane Departure Warning (LDW) is temporarily
unavailable due to too high of a temperature of the
LDW camera.
Screen Cause Do this (Reference)
BK0223400US.book 165 ページ ２０１５年２月１３日 金曜日 午後１２時１５分
Information Provided by: