Mitsubishi 2016 OUTLANDER User Manual

USB input terminal (if so equipped)
5-216 Features and controls
5
5. To remove the USB connector cable, turn
the ignition switch to the “LOCK” posi-
tion or put the operation mode in OFF
first and perform the installation steps in
reverse.
N00566901102
1. Park your vehicle in a safe place and turn
the ignition switch to the “LOCK” posi-
tion or put the operation mode in OFF.
2. Open the USB input terminal cover (A) in
the floor console box.
3. Connect the Dock connector (C) to the
iPod (B).
4. Connect the Dock connector (C) to the
USB input terminal (D).
CAUTION
 Keep the lid of the floor console box closed
while driving the vehicle. A lid or the con-
tents of the floor console box could other-
wise cause injuries.
NOTE
 Do not connect the USB memory device to
the USB input terminal directly.
The USB memory device may be damaged.
 When closing the floor console box, be care-
ful not to trap the USB connector cable.
How to connect an iPod
NOTE
 Use a genuine Dock connector from Apple
Inc.
CAUTION
 Keep the lid of the floor console box closed
while driving the vehicle. A lid or the con-
tents of the floor console box could other-
wise cause injuries.
NOTE
 When closing the floor console box, be care-
ful not to trap the connector cable.
BK0223400US.book 216 ページ ２０１５年２月１３日 金曜日 午後１２時１５分
Information Provided by:

Mitsubishi 2016 OUTLANDER Specifications

General

Brand	Mitsubishi
Model	2016 OUTLANDER
Category	Automobile
Language	English