1. Apply the brakes and keep them applied.
2. Have someone place chocks or blocks
under both the vehicle and trailer wheels.
3. When the chocks or blocks are in place,
release your brakes slowly until the
chocks or blocks absorb the load.
4. Apply the parking brake firmly.
5. Set the selector lever to the “P” (PARK)
position and turn off the engine.
When restarting out after parking on a hill:
1. Check that the selector lever is set to the
“P” (PARK) position.
2. Start the engine. Be sure to keep the brake
pedal depressed.
3. Set the selector lever to the “D” (DRIVE)
position or “R” (REVERSE) position.
4. Release the parking brake and brake pedal
and slowly pull or back away from the
chocks or blocks. Stop and apply your
brakes.
5. Have someone retrieve the chocks or
blocks.
BK0223400US.book 16 ページ ２０１５年２月１３日 金曜日 午後１２時１５分
To Next Page
Loading...
Need help?
General
