Automatic climate control air conditioner
Comfort controls 7-13
N00731801125
Blower speed and vent mode may be con-
trolled manually by setting the blower speed
selection switch and the MODE switch to the
desired positions. To return to automatic
operation, press the AUTO switch.
N00732401506
To remove frost or mist from the windshield
and door windows, use the MODE switch or
defogger switch (“ ” or “ ”).
Use this setting to keep the windshield and
door windows clear of mist, and to keep the
leg area heated (when driving in rain or
snow).
1. Set the air selection switch to the outside
position.
2. Set the MODE switch to the “ ” posi-
tion.
3. Select your desired blower speed by
pressing the blower speed selection
switch.
4. Select your desired temperature by press-
ing the temperature control switch.
5. Push the air conditioning switch.
Set the temperature at about 75 (when the
outside temperature unit of the multi-infor-
mation display shows °F) or 24 (when the
outside temperature unit of the multi-infor-
mation display shows °C) under normal con-
ditions.
When the engine coolant temperature is low,
the air temperature from the heater will be
cool/cold until the engine warms up, even if
you have selected warm air with the temper-
ature switch. To prevent the windshield and
windows from fogging up, the vent mode
will be changed to “ ” and the blower
speed will be reduced.
Operating the air conditioning
system (manual mode)
Defrosting or defogging (wind-
shield, door windows)
For safety, make sure you have a clear view
through all the windows.
For ordinary defrosting
BK0223400US.book 13 ページ ２０１５年２月１３日 金曜日 午後１２時１５分
To Next Page
Loading...
Need help?
General
